|
|
Use of R-material in asphalt mixtures with highly modified binder (HiMA)
Christ, Roman ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is paid attention to the influence of different dosing of R-material containing unmodified asphalt on the properties of asphalt concrete for abrasive layers (AC011 +) bonded with polymer highly modified asphalt (binder type HiMA). The properties of asphalt mixtures will be evaluated by means of the stiffness modulus test and the test of low-temperature properties by a uniaxial tensile test.
|
|
|
Properties of asphalt mixtures with RAP
Trnka, Lukáš ; Coufalíková, Iva (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis deals with the properties of asphalt mixtures with reclaimed asphalt. Possibilities of rejuvenate of binder contained in reclaimed asphalt are mentioned in the theoretical part. There is explained the principle of rejuvenators function, types of rejuvenators and ways of rejuvenators dosing into the asphalt mixture. The procedures for performing the stiffness modulus test (2PB-TR) and the low temperature (TSRST) test are described in the following part. Individual tests are evaluated and asphalt mixtures are compared in the practical part of bachelor thesis.
|
|
|
New trends in the construction of flexible pavements
Palátová, Marcela ; Špaček, Petr (referee) ; Hýzl, Petr (advisor)
The aim of this thesis is to introduce innovations and trends in the construction of flexible pavement layers, which are used abroad. The paper is focused on some surfaces, which help to reduce noise pollution from traffic, and binders, which are based on natural ingredients called bioasphalt. It provides an information summary of increasing share of reclaimed asphalt in bituminous mixtures and introduces possible procedures that could lead to an increase in pavement life.
|
|
|
Stone mastic asphalts with recycled materials - bituminous binders properties
Dzurková, Veronika ; Coufalíková, Iva (referee) ; Hýzl, Petr (advisor)
The bachelor thesis is focused on the issue of adding R-material to stone mastic asphalt mixtures (SMA). The material was obtained from a plant that put the mixture in the test section on the road II/227. The theoretical part describes the problems of recycling of asphalt roads, bituminal binder theory and problems associated with the addition of R-material to hot asphalt mixtures. Bituminal binders from mixtures with different percentages of R-material were extracted in the practical part. Empirical and functional tests were performed on these binders. The aim of the thesis is to determine the influence of the presence of R-material on SMA asphalt mixture in terms of properties of asphalt binder.
|
|
|
Usage of polymer modified bitumens and rejuvenators in asphalt mixtures
Maláník, Stanislav ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
Diploma thesis deals with the influence of various dosing of Reclaimed asphalt pavement (RAP) using modified bitumen on the properties of asphalt concrete (ACO 11+) of cemented by polymer modified bitumen, while a rejuvenating agents are added into asphalt mixtures. The theoretical part of the thesis summarizes the basic knowledge of pavement recycling, polymer modified bitumens and their reuse in asphalt mixtures. The practical part deals with laboratory tests of ACO 11+ mixtures with the RAP proportion of 0 % to 50 %. The asphalt mixtures compared are evaluated by means of the Thermal Stress Restrained Specimen Test (TSRST) and Stiffness test. The results obtained within the diploma thesis can approximate the issue of recycling of asphalt mixtures with polymer modified bitumens.
|
|
|
Recycling of asphalt mixtures for low-traffic roads
Musil, Lukáš ; Dašek, Ondřej (referee) ; Varaus, Michal (advisor)
This bachelor's thesis deals with 100% pure recycling by method of hot mix asphalt recycling using a rejuvenating additive (so-called rejuvenator) for the device development in cooperation with an external company. The aim of bachelor's thesis is to determine the amount of dosing of the rejuvenator and to determine the compaction temperature for the processing the asphalt mixture. On the basis of determining the properties of the reclaimed asphalt pavement, by means of tests in the laboratory. According to the determined properties of the reclaimed asphalt pavement, the percentage of rejuvenator required to achieve the required properties of the asphalt mixture for subsequent processing and laying on the road.
|
|
|
The usage of asphalt and concrete recycled materials to roads
Svrčina, Vít ; Valentin, Jan (referee) ; Stehlík, Dušan (advisor)
Currently it is important to address the re-use of building materials from construction reconstructed or upgraded roads. Commonly used technologies cold and hot asphalt recycling are starting using to complement with technologies using cold asphalt mixtures with rejuvinators or softeners. This type of asphalt mixtures could be used in pavement constructions with lower traffic load. This thesis deals with the design and laboratory assessment of unbound and bound mixtures R-material and recycled concrete. This thesis is experimentally testing the possibility of using functional tests to optimize the design of asphalt mixture with 100% representation of R-material with a possible revival of asphalt emulsion with a rejuvenator.
|
|
|
Use of R-material in asphalt mixtures with PMB type binder
Navrátilová, Pavlína ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The diploma thesis is focused on the use of R-material in asphalt mixtures with a PMB type binder. The work is divided into a theoretical part and a practical part. The theoretical part describes the acquisition of R-material by road milling, the use of R-material, the binder used in the practical part of the work and the types of recycling. The practical part deals with the design of four types of asphalt mixtures with different content of R-material in the asphalt mixture. It also deals with the description of functional tests of asphalt mixtures and the results of these tests.
|
|
|
Design of asphalt mixtures with the use of higher amount of RAP
Pavličík, Petr ; Matoušek, David (referee) ; Varaus, Michal (advisor)
In the introduction of the Master’s thesis describes for obtaining and processing of reclaimed asphlalt. Major point of the thesis is design of asphalt mixtures with use of higher amount of RAP for asphalt binder course. Asphalt mixtures were designed with contents of 0%, 30%, 50% and 70% of RAP. On each asphalt mixtures were compared parameters set out by functional tests – resistence to permanent deformation and resistence to water.
|
|
|
Using Reclaimed Asphalt Pavement in High Modulus Asphalt Mixture for Binder Asphalt Courses
Klimek, Matěj ; Hýzl, Petr (referee) ; Šperka, Pavel (advisor)
The bachelor thesis deals with design of high modulus asphalt mixture with using 30 % reclaimed asphalt pavement in combination with polymer modified bitumen. The goal of this thesis is to verify if the mixture reaches the requirements of technical regulations TP 151 [1]. Selected tests were performer in accordance with the European standards ČSN EN 12697 Bituminous mixtures – Test methods for hot asphalt mixtures. Theoretical part of my thesis is focused on possibilities of addition higher amounts of reclaimed asphalt pavement into asphalt mixtures.
|
guest ::
